#3180 USED KINGSTON 17X70
$5,500.00
The Kingston 17×70 is a used engine lathe suited for general-purpose turning and repair work. With ample capacity for longer shafts and maintenance jobs, it offers a cost-effective solution for shops needing reliable manual turning capability.
The Kingston 17×70 (HJ-1700 class) lathe combines power, rigidity, and precision. With a 17″ swing over the bed, 70″ between centers, and a 2.25″ spindle bore (optional 3.0″ upgrade), it is built to handle a wide range of turning applications. The geared head design offers 12 spindle speeds from 35 to 2,000 rpm, making it suitable for roughing, finishing, threading, and maintenance work. Constructed with heavy-duty bedways and reliable components, this lathe provides consistent accuracy and long service life.
| Specification | Value |
|---|---|
| Manufacturer | Kingston |
| Model | HJ-1700 (17″ × 70″ class) |
| Machine Type | Manual Engine / Geared Lathe |
| Swing Over Bed | 17″ |
| Swing Over Cross Slide | 10.6″ |
| Swing in Gap | 24″ |
| Distance Between Centers | 70″ |
| Bed Width | 11.75″ |
| Gap Width (in front of faceplate) | 5.9″ |
| Height of Center | 42.3″ |
| Spindle Bore | 2.25″ (optional 3.0″) |
| Spindle Nose / Taper | D1-6 camlock |
| Spindle Speeds | 12 speeds, 35 – 2,000 rpm |
| X-Axis Travel | 9.01″ |
| Z-Axis Travel | 70″ |
| Feed Range | Longitudinal 0.0012″ – 0.039″/rev, Cross 0.0004″ – 0.0117″/rev |
| Threading Ranges | Inch: 2 – 72 TPI (44 pitches), Metric: 0.2 – 14 mm (39 pitches) |
| Compound Travel | 5.7″ |
| Cross Slide Travel | 10.4″ |
| Tailstock Quill Travel | 6.7″ |
| Tailstock Quill Diameter / Taper | 2.3″, MT #4 |
| Main Drive Motor | 7.5 hp |
| Coolant Pump Motor | 1/8 hp |
| Floor Space | 120″ × 41″ |
| Machine Weight | 3,960 lb |
| Final Listing Price | Request Quote |
Features & Options
- Heavy-duty geared headstock with 12 spindle speeds
- Precision ground and hardened bedways
- Wide 11.75″ bed for rigidity
- 2.25″ through-spindle bore (3.0″ optional)
- Threading capability: inch and metric ranges
- Power feeds on longitudinal and cross slide
- Tailstock with 6.7″ quill travel
- Coolant system with independent motor
- Gap bed section for larger swing (24″)
Specifications may vary depending on configuration. Verify with manufacturer or actual machine plate.
TERMS & CONDITIONS
AS-IS SALE: All equipment is sold strictly “AS IS, WHERE IS”, with all faults, and without any warranty or guarantee, express or implied. Buyer assumes full responsibility for inspection, testing, and acceptance of the equipment prior to purchase.
DISCLAIMER OF WARRANTIES: Texas Machinery Exchange expressly disclaims, to the fullest extent permitted by law, all warranties, whether express or implied, including but not limited to any warranty of merchantability, fitness for a particular purpose, performance, durability, condition, or suitability of the equipment, its components, or accessories.
NO RETURNS / NO REFUNDS: All sales are final. No returns, refunds, exchanges, or credits will be accepted under any circumstances. Buyer waives any right to revoke acceptance of the equipment once purchased.
LIMITATION OF LIABILITY: In no event shall Texas Machinery Exchange be liable for any direct, indirect, incidental, consequential, special, or punitive damages, including but not limited to loss of profits, downtime, or damage to other property, arising out of or relating to the sale, use, or operation of the equipment.
SPECIFICATIONS: All specifications are believed to be accurate but must be verified by Buyer prior to purchase.
ENTIRE AGREEMENT: This document constitutes the entire agreement between the parties and supersedes all prior negotiations, representations, or agreements, whether written or oral. No modification shall be valid unless in writing and signed by both parties.
ERRORS: Texas Machinery Exchange reserves the right to correct clerical or typographical errors.
GOVERNING LAW & VENUE: This Agreement shall be governed by and construed in accordance with the laws of the State of Texas. Buyer agrees that any dispute, claim, or cause of action arising out of or relating to this Agreement or the equipment shall be brought exclusively in the state or federal courts located in Montgomery County, Texas, and Buyer hereby submits to the personal jurisdiction of such courts.
related products
We Can Handle delivery
Our logistics team ensures safe, reliable, and on-time delivery straight to your facility.
Easy Financing & payments
We make purchasing hassle-free with flexible financing plans and straightforward payment options.
List Your Machine Easily
Selling your equipment is simple! Provide the details, and we’ll help you connect with serious buyers.
Many Brands, Many Models
Explore a wide selection of trusted manufacturers and machine models.
